Recently Viewed Topics
About Scanners
Cloud Scanners
By default, Tenable.io is configured with region-specific Cloud Scanners.
The following table identifies each Tenable.io Scanner and, for whitelisting purposes, their IP address range.
|
Scanner |
IP Range |
IPv6 Range |
|---|---|---|
|
Amazon CA-CENTRAL-1 (Canada) |
35.182.14.64/26 |
2600:1f11:622:3000::/56 |
|
Amazon US-EAST (Ohio) |
13.59.252.0/25 |
2600:1f16:8ca:e900::/56 |
|
Amazon US-EAST (Virginia) |
54.175.125.192/26 34.201.223.128/25 |
2600:1f18:614c:8000::/56 |
|
Amazon US-WEST (California) |
54.219.188.128/26 13.56.21.128/25 |
2600:1f1c:13e:9e00::/56 |
|
Amazon EU-CENTRAL (Frankfurt) |
54.93.254.128/26 |
2a05:d014:532:b00::/56 |
|
Amazon AP-SOUTHEAST (Singapore) |
54.255.254.0/26 |
2406:da18:844:7100::/56 |
When creating scans, these scanners can be selected when creating and performing scans.
Linked Scanners
In addition to using Tenable.io scanners, you can also link Nessus and PVS scanners to Tenable.io.
On the Linked Scanners page, scanners are identified by scanner type (Nessus or PVS) and indicate if the scanner has Shared permissions.
Once remote scanners are linked to Tenable.io, those scanners can be added to Scanner Groups, managed, and selected when configuring scans.
To link a scanner to Tenable.io, see Scanners and Agents.