TOC & Recently Viewed

Recently Viewed Topics

Sensors Overview

Tenable.io supports the following sensor types:

  • Tenable-provided regional cloud scanners.
  • Manually configured linked sensors (Nessus scanners, NNM instances, Web Application Scanning sensors, and Nessus Agents)

Cloud Sensors

By default, Tenable provides regional cloud sensors. You can select these sensors when you create and launch scans.

The Tenable.io interface displays regional cloud sensors in the following groups:

  • US Cloud Sensor: A group of sensors from one US-EAST range (Ohio or Virginia) and the US-WEST range.
  • US East Cloud Sensors: A group of sensors from either the Ohio or Virginia US-EAST range.
  • US West Cloud Sensors: A group of sensors from the US-WEST range.
  • AP Singapore Cloud Sensors: A group of sensors from the Singapore AP-SOUTHEAST range.
  • EU Frankfurt Cloud Sensors: A group of sensors from the EU-CENTRAL range.

The following table identifies each Tenable.io regional cloud sensor and, for whitelisting purposes, its IP address ranges. These IP address ranges are exclusive to Tenable.

Sensor

IP Range

IPv6 Range

Amazon CA-CENTRAL-1 (Canada)

35.182.14.64/26

35.182.14.0/24

2600:1f11:622:3000::/56

Amazon US-EAST (Ohio or Virginia)

13.59.252.0/25

54.175.125.192/26

34.201.223.128/25

3.132.217.0/25

2600:1f16:8ca:e900::/56

2600:1f18:614c:8000::/56

Amazon US-WEST (California)

54.219.188.128/26

13.56.21.128/25

2600:1f1c:13e:9e00::/56

Amazon EU-CENTRAL (Frankfurt)

54.93.254.128/26

18.194.95.64/26

3.124.123.128/25

2a05:d014:532:b00::/56

Amazon EU-WEST (London)

35.177.219.0/26

2a05:d01c:da5:e800::/56

Amazon AP-SOUTHEAST (Singapore)

54.255.254.0/26

2406:da18:844:7100::/56

Amazon AP-SOUTHEAST (Sydney)

13.210.1.64/26

2406:da1c:20f:2f00::/56

Amazon AP-Northeast-1 (Tokyo) 13.115.104.0/24 2406:da14:e76:5b00::/56
Tip: The above ranges can be used for whitelisting cloud.tenable.com for internal scanner or agent communications. However, the IPs listed above may change.

Linked Sensors

After you install a Nessus scanner, NNM instance, Web Application Scanning sensor, or Nessus Agent sensor, you can link it to Tenable.io.

Before you can use linked sensors in Tenable.io scans, you must:

  1. Install the appropriate Tenable product on the sensor or the host you want to scan. For more information, see:

  2. Link the sensor or link the agent to Tenable.io.

After linking a sensor, you can:

Copyright © 2019 Tenable, Inc. All rights reserved. Tenable, Tenable.io, Tenable Network Security, Nessus, SecurityCenter, SecurityCenter Continuous View and Log Correlation Engine are registered trademarks of Tenable, Inc.. Tenable.sc, Lumin, Assure, and the Cyber Exposure Company are trademarks of Tenable, Inc. All other products or services are trademarks of their respective owners.