Scan Configuration

To configure scans with the Cisco Meraki integration:

  1. Log in to your Tenable user interface.
  2. In the upper-left corner, click the Menu button.

    The left navigation plane appears.

  3. In the left navigation plane, click Scans.

    The Scans page appears.

  4. In the upper-right corner of the page, click the Create Scan button.

    The Select a Scan Template page appears.

  1. Select a scan template.

    The scan configuration page appears.

  2. In the Name box, type a name for the scan.

  3. In the Targets box, type an IP address, hostname, or range of IP addresses.
  1. (Optional) Add a description, folder location, scanner location, and specify target groups.

    The credentials options appear.

  2. Click the Credentials tab.

    The Credentials pane appears.

  3. Click the Miscellaneous option.

    The Miscellaneous options appear.

  4. Select Cisco Meraki.

    The Cisco Meraki options appear.

  5. Configure each option for authentication.

    Note: You can configure a maximum of five Cisco Meraki credentials in a single scan policy.

    Option Description Required

    Cisco Meraki API Host

    Hostname or IP address to the Cisco Meraki Dashboard API host.

    Yes

    Cisco Meraki API Port

    Port of the Cisco Meraki Dashboard API. (Default 443)

    Yes

    Cisco Meraki API Key

    API Key for authentication to the Cisco Meraki API.

    Yes

    CIsco Meraki Organization Name

    Enter a single organization per credential.

    Yes

    CIsco Meraki Network Name

    Enter one or more comma-separated network names. No

    Cisco Meraki Product Type

    Enter one or more comma-separated product types. Valid product types: appliance, camera, cellularGateway, secureConnect, sensor, switch, systemManager, wireless, and wirelessController. No

    Cisco Meraki Tag

    Enter one or more comma-separated tags used to filter device searches within an organization.

    No

    Cisco Meraki Device Name

    Enter a single Cisco Meraki device name. (e.g., "Meraki MS120-8")

    No

    Cisco Meraki Device Model

    Enter one or more comma-separated Cisco Meraki device models. (e.g., "MS120-8")

    No

    Device Serial Number

    Enter one or more comma-separated device serial numbers.

    No

    Device MAC Address

    Enter one or more comma-separated device MAC Addresses.

    No

    Discover Devices

    Adds any discovered Cisco Meraki devices to the targets to scan. (Default Off)

    No

    HTTPS

    When set to On, the field expands with the option to enable Verification of SSL Client Certificate if a Custom CA is configured. (Default Off)

    No