Assets

Tenable Security Center Director assets are lists of devices (for example, laptops, servers, tablets, or phones) within a Tenable Security Center Director organization. Assets can be shared with one or more users based on local security policy requirements.

You can add an asset to group devices that share common attributes. Then, you can use the asset during scan configuration to target the devices in the asset. Examples of common attributes include:

  • IP address ranges

  • hardware types

  • vulnerabilities

  • outdated software versions

  • operating systems

Tenable Security Center Director supports template-based and custom assets. For more information, see Add a Template-Based Asset and Add a Custom Asset. To view details for any of your assets, see View Asset Details.

To view details about individual hosts that appear in your assets, see View Host Details.

Note: When a scan import completes, it queues a job to calculate all dynamic and combination assets for the import repository. The next scan import does not begin until the previous scan import asset job completes. Usually the asset job runs quickly, but delays can occur due to extremely large repositories, a large quantity of assets, a backlogged job queue, or other system issues. This does not affect running scans.

Asset lists are calculated for each repository, and updating one repository does not affect other repositories.

Tenable provides asset templates that you can customize for your environment. Tenable-provided asset templates are updated via the Tenable Security Center feed and visible depending on other configurations.

Tenable Security Center Director supports the following custom assets types: Static assets are lists of IP addresses. You can use static assets immediately after configuration., Option,Combination assets allow you to create an asset based on existing assets and the AND, OR, and NOT operators. , Dynamic assets are flexible groups of condition statements that Tenable Security Center Director uses to retrieve a list of devices meeting the conditions. Tenable Security Center Director refreshes dynamic asset lists using the results from Tenable Security Center scans. You cannot use dynamic assets until after Tenable Security Center performs an initial discovery scan and retrieves a list of devices., You can use a watchlist asset to maintain lists of IPs that are not in the user’s managed range of IP addresses. You can filter for IPs from a watchlist regardless of your IP address range configuration to help analyze event activity originating outside of the user’s managed range. For example, if a block of IP addresses is a known source of malicious activity, you could add it to a Malicious IPs watchlist and added to a custom query., and Option.

Static assets are lists of IP addresses. You can use static assets immediately after configuration.

For example, if your organization assigns laptops within a defined IP address range, you can create a custom static asset for laptops using that IP address range.

Option

Description

Name

A name for the asset.

Description

A description for the asset.

Tag

A tag for the asset. For more information, see Tags.

IP Addresses

IP addresses to include within the asset (20,000 character limit).

  • Type a comma-separated list of IP addresses, CIDR addresses, or ranges.

  • Upload a .txt file containing a comma-separated list of IP addressees, CIDR addresses, or ranges.

Note: You cannot select a DNS name list asset as the target of an agent scan or an agent synchronization job.

Option

Description

Name

A name for the asset.

Description

A description for the asset.

DNS Names

The DNS hostnames for the asset to be based on.

Combination assets allow you to create an asset based on existing assets and the AND, OR, and NOT operators.

Combination assets can include agent IDs if the asset contains exclusively dynamic assets. You may experience unexpected asset behavior if your combination asset contains other asset types and interacts with agent repository data.

Option

Description

Name

A name for the asset.

Description

A description for the asset.

Combination

This option accepts multiple existing assets utilizing the operators AND, OR, and NOT. You can use these operators and multiple existing assets to create new unique assets. If the source assets change, the Combination asset updates to match the new conditions.

To configure the query:

  1. Click inside the Combination box.

    A list of assets appears.

  2. Click one of the options in the list to select it.

  3. Press Space.

  4. Continue selecting options and pressing space to describe the combination asset you want to configure.

Tip: A red border around a combination option indicates there is a problem in the query logic.

Dynamic assets are flexible groups of condition statements that Tenable Security Center Director uses to retrieve a list of devices meeting the conditions. Tenable Security Center Director refreshes dynamic asset lists using the results from Tenable Security Center scans. You cannot use dynamic assets until after Tenable Security Center performs an initial discovery scan and retrieves a list of devices.

Note: Before a scan can target a dynamic asset list, you must first run a host discovery scan in the associated repository. For more information, see the troubleshooting article.

Dynamic assets can include agent IDs.

For example, in the asset above, Tenable Security Center Director retrieves a list of Linux systems listening on TCP Port 80. For more information about using dynamic asset conditions, see Dynamic assets are flexible groups of condition statements that Tenable Security Center Director uses to retrieve a list of devices meeting the conditions. Tenable Security Center Director refreshes dynamic asset lists using the results from Tenable Security Center scans. You cannot use dynamic assets until after Tenable Security Center performs an initial discovery scan and retrieves a list of devices..

Option

Description

Name

A name for the asset.

Description

A description for the asset.

Asset Definition

Defines the rules for creating a dynamic asset list. Hover over an existing rule to display the options to add, edit, or delete a group or a rule.

Dynamic Asset Rule Logic

Valid Operators

Effect

Plugin ID

is equal to

Value must be equal to value specified.

not equal to

Value must be not equal to value specified.

is less than

Value must be less than the value specified.

is greater than

Value must be greater than the value specified.

Plugin Text

is equal to

Value must be equal to value specified.

not equal to

Value must be not equal to value specified.

contains the pattern

Value must contain the text specified (for example, ABCDEF contains ABC).

Posix regex

Any valid Posix regex pattern contained within “/” and “/” (example: /.*ABC.*/).

Perl compatible regex

Any valid Perl compatible regex pattern.

Operating System

is equal to

Value must be equal to value specified.

not equal to

Value must be not equal to value specified.

contains the pattern

Value must contain the text specified (for example, ABCDEF contains ABC).

Posix regex

Any valid Posix regex pattern contained within “/” and “/” (for example, /.*ABC.*/).

Perl compatible regex

Any valid Perl compatible regex pattern.

IP Address

is equal to

Value must be equal to value specified.

not equal to

Value must be not equal to value specified.

DNS, NetBIOS Host, NetBIOS Workgroup, MAC, SSH v1 Fingerprint, SSH v2 Fingerprint

is equal to

Value must be equal to value specified.

not equal to

Value must be not equal to value specified.

contains the pattern

Value must contain the text specified (for example, 1.2.3.124 contains 124).

Posix regex

Any valid Posix regex pattern contained within “/” and “/” (for example, /.*ABC.*/).

Perl compatible regex

Any valid Perl compatible regex pattern.

Port, TCP Port, UDP Port

is equal to

Value must be equal to value specified.

not equal to

Value must be not equal to value specified.

is less than

Value is less than value specified.

is greater than

Value is greater than the value specified.

Days Since Discovery, Days Since Observation

is equal to

Value must be equal to value specified (maximum 365).

not equal to

Value must be not equal to value specified (maximum 365).

is less than

Value is less than value specified (maximum 365).

is greater than

Value is greater than the value specified (maximum 365).

where Plugin ID is

Any valid plugin ID number. You can enter multiple plugin IDs using a range or comma-separated plugin IDs (for example, 3, 10189, 34598, 50000-55000, 800001-800055).

Severity

is equal to

Value must be equal to value specified: Info, Low, Medium, High, or Critical.

not equal to

Value must be not equal to value specified: Info, Low, Medium, High, or Critical.

is less than

Value must be less than the value specified: Info, Low, Medium, High, or Critical.

is greater than

Value must be greater than the value specified: Info, Low, Medium, High, or Critical.

where Plugin ID is

Any valid plugin ID number. You can enter multiple plugin IDs using a range or comma-separated plugin IDs (for example, 3, 10189, 34598, 50000-55000, 800001-800055).

Exploit Available

Is

Click True or False in the drop-down box.

Exploit Frameworks

is equal to

Value must be equal to value specified.

Is not equal to

Value must not be equal to value specified.

contains the pattern

Value must contain the pattern entered.

XRef

Value must be in the XRef option.

You can use a watchlist asset to maintain lists of IPs that are not in the user’s managed range of IP addresses. You can filter for IPs from a watchlist regardless of your IP address range configuration to help analyze event activity originating outside of the user’s managed range. For example, if a block of IP addresses is a known source of malicious activity, you could add it to a Malicious IPs watchlist and added to a custom query.

Note: Watchlists only use event data to create the asset list.

Option

Description

Name

A name for the asset.

Description

A description for the asset.

IP Addresses

IP addresses to include within the asset list (20,000 character limit). You can enter one address, CIDR address, or range per line.

Click Choose File to import a list of IP addresses from a saved file.

Option

Description

Name

The asset name.

Asset

Click Choose File to choose the asset that was previously exported for import into Tenable Security Center Director.