FAQ: Network
This section provides a frequently asked questions on network exposure.
- For overview of network exposure, see Network Exposure.
- To configure scanning settings, see Network Scanner.
Enabling the Network Scanner
Enabling the scanner transitions Tenable One Cloud Exposure to a verified reachability model. The scanner attempts to connect to direct resources flagged by Network Evaluation; successful connections result in the resource being classified as Public and the creation of Network Endpoints.
Yes. Once enabled, the scanner becomes the authoritative source for direct resources. If the scanner cannot verify reachability, the severity of findings that require a resource to be Public (such as "EC2 Instance is exposed to the internet") is affected.
No. Once enabled, the scanner runs approximately every 24 hours and requires no manual intervention.
Network Evaluation vs. Network Scanner
Network Evaluation is a discovery tool that performs static analysis of cloud configurations to identify resources that appear internet-facing. The Network Scanner, when enabled, is the authoritative validator. For direct resources, the scanner’s result is final: a resource is only classified as Public if the scanner confirms a direct path from the internet.
Under the verified reachability model, a direct resource is only classified as Public if the Network Scanner establishes a successful connection. If the scanner cannot connect (for example, because a firewall, WAF, or proxy blocks the attempt), the resource is marked as not public to eliminate false positives.
Network Endpoints
Each Network Endpoint is a unique host and port combination confirmed reachable from the internet. Because endpoints are created only when a live connection succeeds, they provide the deterministic proof required by the verified reachability model to classify a resource as Public and trigger risk severity boosting.
There are several possible reasons:
- The Network Scanner is not enabled.
- The resource was not found to be potentially exposed during Network Evaluation.
- Indirect resource: The resource is an indirect resource (such as a load balancer or API gateway). The scanner currently only supports direct resources with an assigned IP and port.
- The resource type is not supported for verified reachability. See the list of supported resources.
- The resource is protected by an external security control (like a WAF or firewall) that blocked the scanner's connection attempt.
The page shows confirmed endpoints from the latest scan cycle. If an endpoint that was previously listed no longer appears, it means the exposure was resolved or is no longer reachable. Cloud Exposure does not keep a historical log of endpoints that are no longer actively exposed.
Ports and Protocols
The scanner tests a defined set of Common Service Ports. If a resource has other open ports outside this list, those ports are also scanned—as long as the total number of open ports does not exceed the number of common service ports. If the total is higher, only the common service ports are scanned.
For example:
- A resource exposing 10 common and 5 uncommon ports: All 15 are scanned.
- A resource exposing 50 common and 40 uncommon ports: The 50 common ports are scanned along with some of the uncommon ports.
No. The scanner currently tests TCP ports only.
Supported Resources and Origin IPs
The scanner focuses on direct resources such as virtual machines and database instances. See the full list of supported resources for a breakdown by cloud provider.
The scanner originates traffic from the following public IP addresses:
- 3.147.184.122
- 3.19.220.21
Coverage and Limitations
No. Only IPv4 is supported.
Load balancers and API gateways are considered direct resources, and are scanned.
VM behind a load balancer or an API gateway is considered an indirect resource. These are not supported by the Network Scanner for verified reachability. These resources continue to use Network Evaluation (static configuration analysis) to determine if they are Public.
Findings
Yes. The Network Scanner is a factor for determining the severity of findings. Learn more.